smoothie v1
Stückliste Rev. THT
Bauanleitung
This is the BOM for the Through Hole version of smoothie. Please select another revision for the smd version.
It is strongly advised to solder all resistors etc. from the side that they are placed on i.e. the bottom side of the finished module to be able to clip the legs on the other side as close to the pub as possible. Otherwise it might be possible that J6 and J5 end up at an angle.
When assembling make sure to clip off the metal standoffs on RV5 and RV6 so they don't short the pins of the TL072 on the backside.
| ID | Bezeichner | Package | Anzahl | Vorbestückt | Beschreibung | Anbieter |
|---|---|---|---|---|---|---|
| 1 | J2, J3, J4, J5, J6, J7, J8, J9 | PJ301M-12 | 8 | PJ301M-12 | Buchsen | |
| 2 | RV1, RV2, RV3, RV4, RV5, RV6 | Potentiometer Alpha RD901F-40-00D Single Vertical | 6 | B100K | Mono | |
| 3 | R3, R4, R5, R6, R7, R8, R9, R10, R11 | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | 9 | 100K | ||
| 4 | C1, C2 | CP Radial D5.0mm P2.50mm | 2 | 22u | ||
| 5 | C4 | C Disc D4.7mm W2.5mm P5.00mm | 1 | 100n | ||
| 6 | R12, R13 | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | 2 | 1K | ||
| 7 | C3 | C Disc D5.0mm W2.5mm P5.00mm | 1 | 100n | ||
| 8 | R1, R2 | R Axial DIN0207 L6.3mm D2.5mm P7.62mm Horizontal | 2 | 22R | ||
| 9 | J1 | Eurorack Power Header | 1 | EURO_PWR_2x5 | Stecker für Stromversorgung | |
| 10 | U1 | DIP-8 W7.62mm Socket LongPads | 1 | TL072 |
click here